Washing Machine Water Level Sensor Circuit

The water level switch has three connectors.

Washing machine water level sensor circuit. This circuit measures or detects a required level of water liquid or any fluid. For imbalance detection in washing machines TE Connectivity provides vibration sensing with piezoelectric film technology. Automatic washing machine is an open loop system because this machine runs according to pre-set time and speed irrespective of washing of cloth is completed or not.

The tube should also be free of water. Fisher and Paykel top loader washing machine fault codes. Drainage alarm LCD displays flashing E4 error LCD displays flashing E2 error Lid open alert.

The Water Level program will display current water level the rate of flow a message if the container is Filling Emptying Full or Empty and a scrolling graphical history displaying data points representing the past forty level readings. Detach the hose and blow into it to check for a clog. This circuit is using only four components.

It is convenient if the washing machine is empty of water and washing because the water level sensor will not be affected when it is disconnected and latter on re-attached during the repair. Sometimes this hose can come loose from the drum due to vibration. The LED will be activated when the liquid is detected through probes.

Ive never had a failed Water Level Sensor. When the coil raises or lowers---it changes the electronically resonant characteristics of the oscillator circuit. Refer to user manual.

Another possibility is the water hose is clogged so the sensor cannot measure the water level properly. This will increase the cycle time resulting in a. The Water Level is displayed by retrieving the digital.