Indicator light rinse is lit and display is flashing E13 with no water remaining in the drum.
Bosch washing machine flashing red lights. Once the machine is powered up again the error should be reset or cleared. This occurs after water has entered the soap compartment usually after a few minutes. This model has three function buttons left is start centre is rinse plus and right express wash.
If this washing machine symbol lights up in the display panel the appliance has detected too much foam during the wash cycle and will automatically activate an additional rinse cycle to remove the foam. I found that the hot water in-flow had got blocked with limescale at the point where it enters the soap-dispenser tray at the top left of the machine looking from the front. Hold the spin button for around 5 seconds and then release.
When I turned it on I was confronted with the wash and dry lights LEDs flashing alternately. To reset the F21 error on a Bosch machine turn the program knob from the off position 12 oclock to the 6 oclock position and immediately press and hold the spin button NOT THE START BUTTON. Bosch Classixx Washing Machine Lights Flashing What To Do.
No matter what programme is selected the rinse light just flashes. Flashing Wash and Dry Lights on Bosch Dishwasher. Bosch dishwasher shows a steady red light when it is running.
I was using a Bosch table-top SKS51E18EU_IX model dishwasher. Add less detergent to the next washing cycle with the same load. Depending on the model of your Bosch washing machine there are several ways that the child lock can be deactivated.
If you find the spin light flashing at end of the cycle and the laundry is still wet hasnt been spun the explanation could just be that the washing machines out of balance protection system prevented it from spinning. So the steady red light shows that the dishwasher is working. At the end of the program the End indicator lights up and the red beam on the floor on the contrary goes out.