Washing Machine Doesn T Stop Filling With Water

First unplug the washing machine then disconnect the hoses from the back of the unit.

Washing machine doesn t stop filling with water. Faulty Water Level Switch. Diagnosing the Problem Turn on the washing machine and allow it to fill half full of water. One common reason for the failure of a washer to fill is heavy clogging in the filters.

If your washer stops filling up with water or does not get enough water it could be a water valve issue. If the water will not shut off by pushing in the timer or by disconnecting the power cord. Two pairs should have no continuity and one pair should have continuity.

If water enters the tub even though the washer is not switched on it sounds like there is a problem with a water inlet solenoid valve in the machine. The water inlet valve is the part that connects the hot and cold hoses to the washing machine. The first thing that can lead to a washer that wont stop filling with water is the water pressure.

If the tub stops filling when you unplug the washer it is an electrical problem. This valve has small screens in it that filter out any large debris from the water lines. Youll be able to see the filters on the back of the washer sitting in the water inlet valve.

If the switch proves to be the reason your machine wont stop filling with water obtain your washing machine model number or the part number. Why does my washer not stop filling with water. Since the washer stops filling when you turn it off your failure is likely in the water level pressure switch or the air tube between the bottom of the washer tub and the pressure switch in the console.

Water leaks from the washing machine are almost always related to controllable circumstances that are easily remedied. The most common culprit for a washer that wont fill is a clogged water inlet valve. If there is any other result the switch is defective and needs to be replaced.