How To Balance Load In Washing Machine

If the bubble is not in the center of the level on one or all readings the washing machine is out of balance.

How to balance load in washing machine. Turn the feet in the front of the machine with a wrench to adjust the level -- this is easier to do if you lift the front of the machine with a crowbar. Loosen the lock nut on the top of the pedestal leg with an adjustable wrench. Manually redistribute the load inside the drum.

A single bulky item such as a comforter or blanket can cause the. The machine can get unbalanced if one of the motor mounts breaks or comes loose. Set a bubble level across the top panel of the washer near front edge to determine if the appliance is level from side-to-side.

Shock Absorber All front-load washing machines have shock absorbers that are used to dampen the tub movement in the spin cycle. It would normally stop during the spin stage and at times it would keep going through this cycle. To do this it uses either an electric motor or a gas motor.

Set the adjustable wrench to fit the lock nut and then turn it counterclockwise to move it away from the pedestal base. Video of the Day If the subfloor under the machine isnt stable any vibrations will become more severe quickly unbalancing the load. When shock absorbers weaken or become damaged unbalanced loads will cause the washer to shake or move and the machine will often make a loud banging sound during the spin cycle.

For a conventional top-loader dont load clothes above the agitator. Answer 1 of 2. Or if you put just a few large towels or a heavy item in amongst some very light fabrics.

How do you fix an unbalanced drum on a washing machine. If needed move the contents around and try again. Even a large load of laundry should not fill the washer tub more than three-quarters full.