If Water Is Not Draining From Washing Machine

Do not remove the screw on the back of the washer that holds the drain hose against the washer.

If water is not draining from washing machine. One is when the washing machine is left completely full of water and not one drop has been pumped away. Ensure the drain hose is properly connected and installed at a reasonable height. Connect the washing machine to the sink drain if the drain pipe is a 2-inch line.

If lint or other debris builds up in the hose it can impede water flow and affect the operation of the washing machine. You may also have a clog or damage in the drain. If you hear the washing machines pump operating but no water is leaving the machine it is likely that the rubber drain hose running from the back of the machine to the drain standpipe or washtub is clogged with cloth fibers.

It is not unusual for small clothing items like socks or rags to get pulled into the machines drain system and block the hose going into the pump. An electrical fault. If your Kenmore 110 Series Washing Machine is not draining after a wash cycle see the Kenmore 110 Series Washing Machine Wont Drain problem page for possible causes and solutions.

Probably the drain is not provided for by the program this also happens in certain washing modes. If the washer isnt level it may not drain correctly. Water is drained from the washing machine directly into the sink.

How do you plumb a washing. Washers need to be installed at a certain height from the floor. This is probably why your Samsung washing machine is not draining water.

Remove the drain hose from the back of the washer and run a steady stream of water. Otherwise you may need to remove and replace the drain pump. If water is not properly draining from your machine attempt the following steps.