Changing The Belt On A Washing Machine

The next step is.

Changing the belt on a washing machine. This is the belt that turns the drum. Make sure you align the belt correctly on both pulleys. Unplug the washer and remove the front panel.

The first trick is to put the belt onto the smallest pulley normally the motor pulley then ease the belt onto the left hand side of the large pulley normally the drum wheel then turn the belt and the pulley together clock wise until the belt is sitting properly on booth pulleys then if the motor has a tensioner on it you can adjust it to the correct tension. Keep a finger on the belt. Remove the belt cover from the washer.

Step Two Disconnect the Power and Turn the Water Off. How to Replace a Washing Machine Belt in 7 Steps Step One Preparation. With the motor pressed firmly in place tighten the mounting nut by turning the wrench clockwise.

Replacing the belt in a Samsung washing machine Unscrew the cover. When the back panel has been removed the belt should be visible the belt wraps around the drum pulley and also the motor spindle. All you need to do is just pull the belt towards you and then turn the pulley - and away it comes.

Using a 516 socket wrench remove both screws from the belt cover. There would be a similar belt on a dryer and a. Unplug the washing equipment power cable from the wall surface electrical outlet.

How to Change a Belt on an Amana Washing Machine. Use blocks or books to prop up the washing machine enough not to crush any fingers. The next step is to turn the power off to your washing machine.