Bosch Washing Machine Hot Water Connection

Connect the cold water pipe to the cold water tap and connect the wate water pipe to either a stand pipe or to a connection under the sink.

Bosch washing machine hot water connection. Connect the water supply hose. Most washing machines will have cold water inlets only. They use the heating element in the washing machine to precisely heat the water to the required temperature as the hot water inlets are variable in temperature and often take a while to heat up.

With the hot water connection you can save energy if domestic water is heated using solar technology for example. Trust Bosch customer service to help and support you throughout the lifetime of your appliance. To activatedeactivate press and hold the rpm 0 and Finished in ñ buttons at the same time for approx three seconds and you will see the lock symbol appear in the display panel.

You may need pliers or a wrench to disconnect stuck on hoses attached to the old washing machine. Wrap the white tap around the threading of the BSH adapter. His response was yes they should only be connected to cold taps and let the machines heat the water.

Take the hoses out of the holders. Water damage The connection points for the water supply hose and water drain hose are under high water pressure. Connect the adapter to the tap.

This information can be found on page 26 of your user manual. Adapter can be purchased from any hardware stores. Remove bottom piece of the tap.

If you want to connect up a washing machine that uses hot and cold water and therefore has a hot cold fill valve but you only have a cold water supply available you can use a Y Piece connector to connect it up to a single cold water tap. Environmental protection en 7 7Environmental. To meet the high quality demands required by Bosch every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect condition.