Samsung Washing Machine Does Not Fill With Water

It will have a tube pass over it.

Samsung washing machine does not fill with water. When the washing machine does not work please check that the door is tightly closed. The washing machine should be plugged in and powered on. To figure out what is causing this you should.

Thanks Jake - I got a reply back from Samsung which directed me to this page - Contrary to the instructions here I have had the drain hose down below 6 in the drain pipe for the entire time I have been using this washer 15 years but it has so far not been an issue. Water leaks from the washing machine are almost always related to controllable circumstances that are easily remedied. Why Is My Washing Machine Not Filling With Water.

Meanwhile turn off the faucet to the household water supply so the washer doesnt cause a flood. If the tub stops filling when you unplug the washer it is an electrical problem. The troubleshooting part in the manual says to check that water handle on the wall is open all the way and it is.

Use the right amount of HE detergent and remove detergent residue from the washing machine. With these two wires connected the washer will fill if. If the washer still fills slowly replace the water inlet valve.

If the problem happens during large loads it is usually an electronic control board issue. 01 - Water Inlet Valve. There are a few possibilities why your washing machine wont drain.

Low Water Pressure If your Samsung washing machine does not fill with water it may be due to low water pressure. Please also make sure the water source valve is completely connected and turned on. Remember to unplug the washer first before attempting this.