Bolts At The Back Of Washing Machine

The made design is cut into the hole on the wall of the machine body and the bolt is healed on the drum.

Bolts at the back of washing machine. A transit bolt also called a washer shipping bolt is installed through the back a washing machine to keep the tub from moving around during shipping. These bolts lock the drum unit in place stopping it from moving. If so move them gently aside.

Try removeing the back panel and see if the belt has come off. The process itself is as follows. The clothes washer is fitted with transit safety bolts at the rear to avoid possible damage to the interior during transportation.

After that the bolt is lowered into the. The back cover the convex must face to outside and you have to insert the. Normally when you get your new washing machine there will be two rare three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine.

Normally when you get your new washing machine there will be two rare three or four transit bolts fitted through the rear panel of the washing machine that fix to the outer tank of the washing machine. Remove the back cover. You can do this by securing the drum with shipping bolts or transit boltsThese metal rods are inserted into special slots in the rear of the washer to secure the drum.

A transit bolt also called a washer shipping bolt is installed through the back a washing machine to keep the tub from moving around during shipping. Your Samsung Front Load Washing Machine comes with shipping bolts inserted into the back of the machine to keep the tub secure during transportation. The bolts can rip sections off the outer tank tear through the outer casing and cause massive damaging vibrations to be sent through the room in which the washing machine is installed.

Failure to remove these will result in damage to the machine. A transit bolt also called a washer shipping bolt is installed through the back a washing machine to keep the tub from moving around during shipping. On the existing bolt is put on a special die it goes in the kit.