If the water is slow to drain and has not fully emptied the machine will not be allowed to spin.
Zanussi washing machine not spinning fast. This consists of two plastic parts called drive forks due to their teeth usually white that fit into the motor and transmission respectively and. Make the washing machine level by raising or lowering the feet. If the washer is overloaded the motor coupling will fail in order to protect both the motor and transmission.
Blocked Washing Machine Filter. The motor coupling can also fail due to normal wear. I have removed the front and back and have managed to look inside the drum but can not see anything stuckcaught.
When I went to empty it I noticed the washing was still very wet so I put it on to spin again and again and it would not spin so I presumed the balance must be off so removed half of the load and tried again and still no luck. Zanussi washing machine problem. Zanussi 1200 spin washing machine.
Causes that are more serious in scope such as if the pump pulley or belt is broken or damaged could require professional repair. Its been noisy for a while at fast spin Ive been meaning to look into that. Use a spirit level to check whether the machine is level on all its feet.
Posting for 7 years. Unfortunately this fault sounds like it could be the timer the PCB board or even the motor. Adjust the feet using a spanner.
Zanussi washing machine Will not spin Wont spin will not spin doesnt spin fills up but the drum is not turning wont agitate or spin drum doesnt move- these faults can either be motor related pump related or there may be a problem with the printed circuit board. We do not recommend using the product until. 020 7183 6944 Call for a free quote or advice.