Whirlpool Washing Machine Clean Filter Instructions

When your washing machine wont drain it is usually a fault with the pump the most common fault is that the pump impeller is blocked with some lint or a hair.

Whirlpool washing machine clean filter instructions. 20 questions from our users 1. Read all instructions before using the washer. Clean outside of washer.

Remove the lint from the trap by hand. 4 Steps to Clean a Whirlpool Washing Machine Filter. Demonstrating how to clean a Whirlpool Washing Machine using Affresh.

Also check and clean the lint filter at the back of the machine next to the drain hose outlet on a regular basis. If these options dont help the last option is unplug the appliance for a period of 30-60 minutes and try to open the door after that. Where is the lint trap in whirlpool cabrio washer.

Spray the inside of the washing tub with an all-purpose bathroom cleaner and wipe the inside down with an old. This appliance should only be serviced by an authorised service centre and only genuine spare parts should be used. Hobs Cleaning products induction adapter plates hoses and more.

Remove the agitator - remove the 2 x caps on the top front egde of the machine and remove the 2 x screws underneath - look closely at the back of the machine and you will see 2 x wide slots one is under water inlets where the top can be released with a blade screwdriver - lift carefully and look for the earthwire green yellow release it so the top can come off - lay top backward against a support -. Remove the lint filter from your machine by pulling it out of the machine. Your first step is to find the filters location.

Remove the front plinth by holding it tight on both sides and pushing it downward and tilting it to the front. If you want to stack a dryer on top of your washing machine first contact our After-Sales Service or your specialist dealer to verify whether this is possible. Turn the filter plug counter-clockwise until the water begins to drain.