Washing Machine Water Pump Problems

Fortunately you can handle most of these repairs on your own and Repair Clinic can show you a DIY fix for your Haier washing machine.

Washing machine water pump problems. Filter Most washing machines have inbuilt filters that remove foreign objects that may disturb the proper functioning of the inner tubs drainage system. A cause with a very straight-forward solution is the tap being turned off by accident. Most Haier washing machine problems are similar to those you find with other washing machines.

This could occur with the motor running and if it doesnt it is likely due to a failed lid switch. If you hear the washing machines pump operating but no. If you can hear the pump running but the water is not draining then its a blockage.

Check the drain hoses to make sure theyre draining properly. The pump should run. This switch is near the door frame inside the washing machine.

Find your washing machine motor on Amazon. Do the test as mentioned above - Turn off the water remove cover for pump and run the machine on a drainstart a cycle. Check the tap to see whether the valve inside is actually rotating when you turn it on.

This will increase the cycle time resulting in a longer cycle than normal. A loud rumbling inside the machine or a failure of the water to drain out of the tub. An easy way to check that the drain hose is clear is to blow air through it.

Does sounds like an electrical fault not allowing the pump to come on as you have already fitted a new one. Machine will take longer than normal to fill. Check the pump thoroughly for any damage.