Washing Machine Stopped Working With Water In It

Therefore belt issues are not relevant for them.

Washing machine stopped working with water in it. Appliances with direct drive have no belt. Check that the washer is plugged in securely. The most common reason for a washing machine overfilling with water is a broken water-level pressure switch.

Posted 2014-Dec-12 454 pm AEST. Check the circuit breaker or fuse box. If by any chance the drum is very stiff or has seized up this is the problem.

Find your washing machine motor on Amazon. Open the door and turn the drum by hand. This tutorial is for when a washing machine will not fill with water but works OK on spin.

Select cold or hot temperature and if one or the other does not work the valve screen may be clogged. This is one of the most common washing machine problems and the answer usually lies in the drain hose which works with the drain pump to siphon water out of the washing machine. The pressure switch uses air pressure to sense the water level in the machine and tells your washer when to stop.

Test the lid switch. Washer Wont Pump or Spin. Test the outlet for current.

Check the wire mesh and clean or replace it if it is dirty. If all of the above are OK then perhaps the machines cold water inlet valve is either faulty or not being operated by the control. Check that the water supply valves are turned on.