Washing Machine Shakes When On Spin Cycle

The tub spins at a very high speed during the spin cycle.

Washing machine shakes when on spin cycle. 1 Machine was transported with transport bolts which were removed before installation. Why Is My Whirlpool Top Load Washer Shaking Violently On The Spin Cycle. Rock the washer gently from corner to corner to see if its leveled.

Adding one or more towels or redistributing the weight and resetting. Therefore it is important that the washing machine is leveled to help reduce noise and vibrations. Spin cycle selected before water pumped out.

A few important points. Level by raising the front or lowering the rear of the machine. Maytag remains one of the biggest names in washing.

Thus encouraging greater movement when the washing machine enters the spin cycle. It is not the type of shake that it would do if it is off balance but it is bad. A washing machine imbalance can be caused by a unit that does not sit level to the ground.

The balance ring sits on top of the outer tub and helps to counter the force of the spin cycle. Unbalanced Washer The spin speed of an average washing machine is between 600 1400RPM. The problem might be that components that stabilize the washer have broken.

When shock absorbers weaken or become damaged unbalanced loads will cause the washer to shake or move and the machine will. A single large wet item such as a comforter or blanket can hug one side of the washer during the spin throwing the washer off-balance and causing it to vibrate. Loose inlet hose connections or washers filters missing.