Washing Machine No Hot Water Supply

If your HW is heated by gas solar or some other fuel appreciably cheaper than electricity.

Washing machine no hot water supply. Remove the drain hose. Verify that the cold water supply has been turned off and then unscrew the cold water in the pipe. This is perfectly normal.

If the washer is equipped with a water. Hot water supply is too hot. This video is about turning on and off the water supply for this specific washing machine.

You can check this by seeing if the machine will spin even with no water. Furthermore Why is my washing machine not getting hot water. This is as close as I can call it from off site.

Be sure the home water heater is set to supply the recommended water temperature 120F. This can result in air becoming trapped which causes the pressure switch to stay on. Water Inlet Screens And Hoses Washing Machine.

Check the literature supplied with the machine it should state the required water pressure. And if you have a machine that can use HW then it will save you a bit of money and knock about ten minutes off the hot washing cycle. The cold water supply is connected to the main water supply through a hose that is attached to the back of the washing machine.

The y-piece can connect a hot and cold fill washing machine to a cold water supply by connecting the two washing machine hoses to the y bit and the other end connects to the cold water supply so both valves use cold water. Ours only has the cold inlet. The washing machine is connected to the water supply of your house by.