Try to look at the connections of the fill and drain hoses.
Washing machine leaking from bottom when filling. A less common cause of an intermittent leak from the bottom of a washing machine is a defective tub seal. In many cases due to the age of the washing machine drain pump seals can start to leak. If there is still a leak around the drain hose especially during the washer spin cycle the drainpipe is probably clogged.
The washer can leak if it is overloaded or out of balance. In most washers every hose connects the machine to the source of water from the outside. If the hoses are damaged or the fittings dont fit well your appliance will let some water out.
Empty the washing machine move it away from the wall and start the fill cycle. Leaks at the front of a top-load washer are usually caused by a clogged or tilted overflow tube. If you see nothing take the clips holding the pump in place off then pull the pump off and where the shaft of the motor.
A leak at the back of the washer can also be caused by a drain hose not properly secured in the drainpipe. Shut off the water and replace any old heavily corroded or. Usually you will notice lots of rumbling or shaking from the machine during a wash cycle if the pump is faulty.
Water Accummulates on the Floor When Filling the Washing Machine Loose Connections. This Samsung washer leaking from the bottom wasnt a big repair after all. As the name suggests the pressure switch monitors the water level inside the washer and can be responsible for a washing machine leaking from the bottom during fill.
If your Whirlpool top-load washer. Sometimes drain pump plastic hosing can be cracked and also will start to leak. The water pump in a washer is generally located at the bottom of the machine.