Washing Machine Drain Pipe Position

Depending on the distance between the drain pipes for the shower and washing machine you may be able to install a single vent at the drain further downstream to serve them both.

Washing machine drain pipe position. Most washing machines are now plumbed into a u-bend under a sink. Then take the drain hose thats attached to the washing machine and lay the end over the. Miele Washing Machine Drain Hose Spare Part - 01545806.

Check point If the end of drain hose does not fit to the drain line use a rubber coupling not supplied that is resistant to heat and detergent. Function Proper Installation of Drain Hose How to connect your Drain Hose. Add a vent approximately 5 feet from the position of the p-trap and attach a sanitary tee to the vent.

Set the pipe two inches from the adjacent wall and about 36 inches from the ground. Once you have removed the cover you will need to pull out the small drain hose slightly. Using a pair of pliers pinch the clip that is holding the drain hose to the washing machine.

Ensure the lip of the standpipe is 30 inches from the ground. The maximum distance recommended between two drain pipes for them to share a vent is 3½ for a 1½ drain and 5 for a 2 drain pipe. There is less chance that it will get clogged or displaced.

Keep the drain hose free from kinks and knots and minimize the. What causes a washing machine drain to overflow. Additionally check and make sure that the bend in your drain hose is above the height of the washing machine.

If theyre further away than that. Drain Hose Installation. Plumbing into the u-bend is considerably easier and cheaper.