Top Load Washing Machine Water Not Draining

Turn off the power and lay down towels.

Top load washing machine water not draining. Clogged Drain Pump The drain pump is responsible for sucking water out of the. RINSE light is flashing or Po is scrolling on the display 2015 and newer models. This video from Sears PartsDirect shows what to do if your top-load washer wont drain water or spin including how to check hoses and drain lines for clogs and how to check the drain pump for debris.

Here are possible reasons why your top loader Samsung washing machine is not draining water. This is usually always the defective part when your washing machine pumps the water out but will not spin and also when the water overflows on your washer. Clogged Drain Hose Occasionally your washing machines drain hose may get clogged by small bits of clothing such as.

Then lay the washer on its front to access the drain pump underneath the washer. You can check this yourself by removing the 4 screws that hold the control panel in place. Make sure that the drain hose is not kinked or clogged.

Washing machine not draining. Ill go back in to check the drain hose for any blockages. Take the washer out from the wall so you can access the back.

Press Start to resume the cycle or you can select Drain Spin and press Start. Remove any blockage from the drain hose drainpipe or utility sink. The first if you can get to the drain hose easily and get it to floor level is the easiest and is known as gravity draining the washing machine.

The second most common item to go bad in your washer is the Water Level Control Pressure Switch. If you dont find a clog a part could be malfunctioning. I just went through a diagnostic cycle again.