Samsung Washing Machine Moves During Spin Cycle

When you wash one large bulky item such as a blanket or comforter it can hug one side of the machine during the spin cycle.

Samsung washing machine moves during spin cycle. The cycle time keeps on restting from 5-7 seconds to 11-12 seconds. This is just a boring video of my Samsung front load washer making annoying noise during spin cycle. This will throw the washer off balance and cause it to shake violently.

I replaced this part and no longer get those codes. The spin speed of an average washing machine is between 600 1400RPM. At first I was getting errors codes indicating that there was an issue with the water level sensor.

If your Samsung washing machine does not spin as expected during the rinsing or spinning phase of the cycle it is most likely caused by an unbalanced load. 3 Press StartPause to run the Calibration cycle. A general rocking around of a washing machine on spin may just be caused by an uneven floor or an un-level washing machine.

To solve this problem you can generally add one or more towels to redistribute the weight. If the washing machine moves slightly out of position it could just be because it is on a tiled or otherwise shiny floor and the rubber feet just slide around too easily. The washer should then go through a normal complete cycle.

To solve the problem of extra water redistribute the clothes to better balance the washer. So just about 2years old. After you reset the washer it should work fine.

During the spin cycle the door seal is rubbing against the tub causing it to smoke and chew off some. With VRT when the washer spin cycle reaches approximately 400 RPM it pauses and vibrates for a few moments. A washing machine that walks across the room is not possessed or malfunctioning.