Remove Seal From Washing Machine

Unlike conventional cleaners and other options citric acid doesnt affect the washing machines rubber as much since its not so strong.

Remove seal from washing machine. To remove black particles follow these steps to clean the Washing Machine. Unplug the LG washing machineRemove the boot clamp which encircles the door boot seal around the tub opening by spreading the spring at its 6 oclock position with a flathead screwdriver or a spring expansion tool. Once youve cleaned the rubber seal its time to purify the drum and hoses.

When you re ready to put on the new seal start by lubricating it with some dishwashing liquid which will make it easier to fit on. WASHING MACHINES are difficult but necessary to clean especially as black mould can develop in the machines seal. Then add an additional cup of baking soda into the washing machine drum around the seal area.

Then loosen the screw or nut holding the seal in place and pull off the old seal. You can use 2 cups of vinegar ¼ cup of baking soda and ¼ water instead if you do not have bleach on hand. First get a soft cloth soaked in vinegar or lemon juice rub firmly over all the affected areas Clean with a clean cloth soaked in hot waterMay need to do several times.

Leave for a few hours and then remove and rinse. If there is no such setting then run the washing machine without clothes and set the temperature setting to 40 degree celcius. This mould has built up over time in the fold in the rubber seal on the door.

3 Leave it overnight. Then use a cloth or towel to clean the gasket thoroughly. Keep the washers door slightly open always.

In this video James sh. Before you start removing mold from your washing machines rubber seal you have to think of safety measures. Put on rubber gloves to protect your hands and a dust mask to avoid inhaling mold spores.