Remove Concrete Weight From Washing Machine

Now remove all screws that hold front panel to the chase and remove the panel from your washing machine.

Remove concrete weight from washing machine. Remove the bolts holding the concrete counterweights to the front of the tub with a socket wrench. If the drum weight has broken off the drum then the chances are it will need an entire new outer drum fitting. The average life expectancy of a modern washing machine unless its a Miele is said to be about 7 years.

Im thinking this is not good as it could just disintegrate at any moment. Set the front panel aside to access the counterweights. Rather than the usual bolts it appears to have a plastic sleeve with a spring inside it.

Have you ever seen inside of your washing machine. The use of concrete is also the reason why washing machines are normally very heavy to move The design cuts the weight of a typical machine by one-third which in turn lowers the cost of fuel. Cheers for this our Aqualtis AQGMD 149 started banging on spin and all we could find was that it was unbalanced after looking here and then under the washing machine we found lots of concrete dust the counter weight and the lug lying on the floor.

After washing - The word End will appear on the display. Turn the machine back wall. Is there any other way to make it.

I noticed bits of concrete on my kitchen floor near the washing machine. - Switch off the washing machine by turning the selector to the OFF position. The most popular models typically weigh about 70 kg.

It is enough to adhere to the following instructions. I have never done it before and am an average DIYer. Now you need to remove the concrete counter weight from the drum this is held on with large torx screws take your time with this the concrete and the lugs that hold it in place can be.