Remove Agitator Maytag Centennial Washing Machine

I need to know how to remove the agitator from my Maytag top load washer model number HAV2558AWW.

Remove agitator maytag centennial washing machine. Place a spanner wrench over the nut in the bottom of the washer inner tub. Fit the nut driver over the head of the screw. There seems to be something jammed in there and it will not allow the agitator to rotate properly.

How to Replace Your Maytag Washers Agitator Assembly. Tie a knot the way you see it on the picture. If removing the Maytag agitator from a Maytag washer use masking tape to stick the washer lid on the top panel.

Turn the agitator to locate and access the bolt that secures the agitator to agitator shaft. Watch this how to video with simple step-by-step instructions for a successful DIY. To remove a tightly-fitted agitator or one that has become firmly glued in place by soap residue first unplug the washer and remove the agitator cap.

Lift the agitator from the base and remove it from the machine. How to Remove Maytag Washer Tubs Disconnect the power cord of the Maytag washer from the wall outlet. C Raise the locking arm and disconnect the wire connector from the motor.

Sure it beats stains out of laundry but also takes up a lot real estate in the already cramped drum. Insert a 14-inch nut driver into the opening in the side of the agitator. Locate the retaining clips using a plastic putty knife inserted between the front panels and the top and loosen the center bolt of the agitator before setting it aside.

Things You Will Need. Then if there is room between the. Use a knife or something to pry under the seam of the cap and pop.