Moving Washing Machine Drain

Keep the drain hose attached.

Moving washing machine drain. You also need to ensure all the waste pipes run downhill towards the drain and there are no places for water to pool except for in the trap of course. 7 steps to moving a dryer. Set the washer to warm wash and turn it on for 30 seconds to allow the water in the hoses to drain into the.

Next remove the washer drain hose from the drain put the hose on the floor and let the water drain into a bucket or pan. Finally tilt the front of the washer 4 to 6 inches off the ground to get all remaining water in the pump to flow out of the drain hose into the bucket. The elbow remains filled.

Either way disconnect the supply hose s of your washer from the water supply by using slip-joint pliers. Step 1 Turn off Water. Boil a kettle of water.

So if the option fits you go for it. Heres how to unclog a slow-moving drain without calling a plumber. This hose is normally located near the bottom of the machine and it is generally black.

The voltage should meet the requirement. To drain the water from a washing machine use the slip-joint pliers to disconnect the hot and cold water supply hoses for washer models where the water is NOT heated inside the unit or the cold water supply hose for washing machine models where the water is heated inside the unit. Unscrew the shutoff valves with a wrench so you can reuse them.

This is the most recommended drainage option by elite washing machine manufacturers. Empty any remaining water into a bucket. Remove water hoses from the washer.