The response in the link you provided discusses a washing machine that will continue to drain while.
Lg washing machine water drains out while it is filling. Water comes into your washing machine for the wash and rinse cycles through the water inlet valve. Just keeps filling and draining but not at the same time. The hose from washing machine remove filters then clean them thoroughly before re-insertng.
First you need to open the decorative hatch or remove the panel since the filter is just behind them. The smooth out channel might be stopped up. Unplug the washer when the tubs finished filling.
If the water stops coming in when the machines unplugged then there is an electrical problem somewhere. If your washer continues to fill during a drain cycle the water inlet valve could be at fault. This shouldnt be possible if the drain hose is plumbed in properly.
To verify that the valve is at fault unplug the washer when the symptom occurs. If a Washing machine fills with water and drains it away at the same time there are a few possible causes. After one minute is up plug the washer cord back into the wall.
In some cases the hose is twisted so the washer doesnt fill or fills gradually. 02 - Drain Pump. Loosen the washing machines main water supply valves for both cold and hot water.
But never does it start the wash cycle once the desired water level is reached. A gentle humming from the back of the washing machine could be the water valves being energised and trying to take water in. An overflowing LG washer model WT5001CW is definitely a panic-inducing sight and while the cleanup is no easy task the actual repair isnt as difficult as you may think.