How To Use Calgon Washing Machine Cleaner

Run a cycle with bleach and hot water 11.

How to use calgon washing machine cleaner. Step 3 Use this time to spray and wipe the top of the machine with a damp cloth and. Washing detergents contain smaller doses of the softener found in Calgon so in normal washing conditions they should be enough to counter limescale deposits that can build up in the machine. For the best results we recommend using our tested and approved washing machine cleaner every three months to.

Choose a mode with 80-90 degrees intensive washing boiling or cotton. Prevent the development of unpleasant odours. 13 of the bottle will almost fill the machine with bubbles.

A key Calgon ingredient acts as a limescale remover for any particles which have managed to form keeping them suspended in the water until they are dispersed in the rinse phase of the wash. Do this while the water is filling so that the ingredient mixes in properly. Its simple to use - you just pour one of the two 100ml bottles into the detergent drawer then run it on a 60 wash.

Calgon has been a long-time favourite prevention against limescale build- up in washing machines and these tablets also protect against residue and bad smells. Remove the soap dispenser and wash thoroughly with soap and water. Step 2 Set the washer on the hottest and largest load setting then add four cups of white vinegar to the wash cyclePause your washer after 15 minutes and let the mixture sit for about an hour.

Thats what the manufacturers suggest anyway. Citric acid for a washing machine. 15 January 2006 at 436PM.

Calgon goes to work. I find that only about 13 of the bottle poured into the washing machine detergent tray is plenty to give it a good clean. Why this method is the best.