How To Unscrew Washing Machine Filter

Unscrew the water supply and lay a towel under it.

How to unscrew washing machine filter. This short video shows how to clear the drain filter on many front loading washing machines in this case on an ISE hot and cold fill washing machine http. If you cannot find the user manual refer to the above-discussed areas. Pour 2 cups of white vinegar into the drum and run a normal load at high heat.

Coolwasher tells you how to maintain your washing machine in top condition. Unscrew the filter cap anti-clockwise and slide it out. Scrub with a sponge.

Then rinse the filter with a soft-bristled brush and warm water. Mix baking soda and water. The quickest way to clean out your filter is to remove it from the unit and soak it in hot water loosening any clog or trapped residue.

A clogged filter limits the washing machines efficiency and can also lead to more lint deposits on clothes as well as poor drainage. Take the plastic cover under the front panel off and remove the screws holding the filter housing in place. These should be removed then thoroughly clean the filter.

Now open the service flap and let off the water through the pipe. Any idea what tools to use to remove it. You may find obstructions in the filter such as coins buttons or a build-up of lint.

Cleaning the inlet filter and the detergent dispenser drawer. Place a bucket towel or even a baking tray under the pump filter. Push it into the machine and out the bottom.