How To Remove Water Inlet Valve On Whirlpool Washing Machine

On a top load washing machine youll need to pop the lid up to be able to access the inner workings where.

How to remove water inlet valve on whirlpool washing machine. The hoses connect the main water supply to your machine. Remove the water feed tube from the valve. Funny that the hot solenoid is half the price.

Carefully unscrew the hoses with a set of pliers to remove them from the water supply. Remove the water inlet valves mounting screws Tip the control console forward and rest it on the top of the washer. There are two types of inlet valve.

I solved this a simpler way. Start a hot water wash. The most common reasons for replacing the water inlet valve are when the washer fills slowly is making loud noise overflows or stops mid-cycle.

Unscrew the cold water hose from the feed and drop the tip into a bucket. Label the wires to the valve and remove them. Metal screens attached to both ends of the inlet hoses protect the water inlet valve from sediment and debris.

Turn on the washer for 10 seconds. Turn the water valve off. There may be two valves that supply hot and cold water to the washing machine inlets.

Lift the lid and pour 12-gallon of the RV non-toxic antifreeze into the washing machine tub. Remove the screw holding the water inlet valve to the rear panel of the washing machine. And also there will be two screws that secure the top part of the cabinet to the bottom there will be a small piece of metal going from the bottom to the top with a.