How To Connect A Hose Pipe To A Washing Machine

The washing machines drain hose is inserted into the top of the standpipe where it fits into the outlet box.

How to connect a hose pipe to a washing machine. Having a standpipe or laundry sink is the most common solution for connecting the drain hose. Building codes specify how high this pipe must rise above the finished floor. Outer thread of the tap will be exposed.

Using existing waste pipe. If your washer doesnt have a preinstalled drain hose connect the supplied hose to the machines drain opening. We connect the hose on to some 1and half inch PVC pipe that the drain that comes from the wash machine we would like to.

To make sure you get a good seal between the connector and pipe clean the area of pipe with steel wool and remove any paint. A slop sink utility sink is an easy but not recommended way to connect a washing machine drain hose. Install the washing machine valve.

The Boston Washing Machine Y Hose Adaptor is for use with washing machines that require two hoses to be connected to function but you only want to use cold water. There are two connections in the double spigot which allows connecting one to the dishwasher and the other to the washing machine. Wrap plumbers tape clockwise around the threads of the hot water interior water hookup for the washing machine or around the exterior hot water spigot.

The lip must be at. Just drill out that connection on the right push the hose on and tighten a hose grip to make sure it doesnt come off. Connect the washing machine hose to the valve.

Measure the height of the standpipe or sink. Permanently connect the waste hose from the machine to a dedicated waste outlet. In theory all you have to do is to connect the washing machine waste hose to the spigot on the side of the waste trap.