How Do I Balance My Washing Machine

The front legs can be screwed either in or out.

How do i balance my washing machine. Turn the level 90 degrees place it along the top side and finally place the level on the opposite top side. 2 Hold down the Temp and Delay End buttons for 3 seconds until a CB code appears on-screen. You can rock the washer to find out if there are any movements.

Replace the agitator and panel before running the machine again. These allow a smooth spin cycle only if they are sitting on a flat surface. How to Balance a Washing Machine Drum 1.

If something has shifted you can relevel a top-loading washer by tipping the washer forward then placing it back on the floor. 1 Turn the washing machine off and then on again. Your washer has legs that support the machine in an upright position.

Top loading direct drive washers will go off balance for several reasons. An out-of-balance condition can result from an unlevel machine or a worn out tub bearing that allows radial play in the wash basket shaft which causes the entire tub and basket assembly to spin wildly out of control. Step 3 - Tighten Drum.

If your machine is just slightly off level it can affect how clothing settles and throws a machine out of balance. 3 Press StartPause to run the Calibration cycle. You will have four readings of levelness.

It not only results in poorly washed clothing but it often throws the washer out of balance when it reaches the spin cycle. Most washing machines come with adjustable legs in the front and the back. If nothing appears on your display turn off your washing machine and turn it back on while holding the Temp and Delay End.