Error 4e In Samsung Washing Machine

Turn on the washing machine.

Error 4e in samsung washing machine. The number will vary depending on your washing machine model. The 4E 4C error code indicates that the washing machine has detected a problem with the water supply. As mentioned the errors 4E and 4C indicate that your washing machine is not receiving enough water and the issue is usually caused by a problem with one of the washers hoses.

This Happens Within 5 to 10 Minutes after Starting the Wash Program. Check that therere no bents or kinks in your water hose connected to your washing machine. This icon lets you know that a cleaning cycle should be run.

Turn off the machine for a couple of minutes from the network. The button with a sink and no icon is used to set the rinse count for a current cycle. A faulty water inlet valve or the water tap is off.

Samsung washing machine Not filling in allocated time error code 4E and E1 Fault This is essentially a fill timeout error which will normally mean that either the water isnt on or that an inlet valve has failed or pressure switch problem check pipes as well. The 4E 4C error indicates that the washing machine has detected that there is a problem with the water supply. After this the glitch of the control module will disappear.

The most common reason for this error is a blocked or kinked water supply hos e. Unplug it or turn off power at the circuit breaker wait some time for the electrical charge to clear out of the washer usually 1 to 5 minutes at most and then power it up again. See the following steps to do.

Check The Water Supply. You clearly simply need to press the power button to make it turn on. A 4C can occur both at the beginning of the wash cycle and during the wash cycle.