Calibrate Whirlpool Washing Machine

It removes the water from the tub during the spin cycle.

Calibrate whirlpool washing machine. When the Rinse light turns on press Start to begin the Calibration Cycle which runs for 2 to 3 minutes. In the event you do not calibrate the washer the washer may not fill with the correct amount of water for the load or the washer may need often unbalanced masses. Why do you have to calibrate a Whirlpool washer.

Make sure the washer is in Stand By Mode which means the machine is plugged in and all the indicator lights are off. When the Calibration Cycle ends the lid unlocks and the washer shuts off. A calibration might take care of all of them.

The washer pump forces water from the bottom of the machine into the drain hose. Why do you need to calibrate a Whirlpool washer. Press and hold StartPause Hold to Start to run the Calibration.

The tip of this text has a listing of fashions that must be calibrated after certainly one of these repairs. Step 1 - Check Level. If all looks good here try a calibration.

How do you fix an unbalanced washing machine. In the diagnostic mode select the Calibration Cycle by turning the control dial 4 clicks clockwise. The basket speed fault is one of those errors caused by several problems.

Make sure the basket spins freely and look underneath the machine to check the gearcase and pulley. Turn the dial counter-clockwise one click left clockwise three clicks counterclockwise one click and then clockwise one click. How to Confirm You Have Reset Your Whirlpool Washing Machine.