Bush Washing Machine Not Draining

The waste water hose is kinked or blocked.

Bush washing machine not draining. XDo not use flammable detergent sprays or dry. Check that there are no kinks in the waste water hose by pulling the appliance out slightly and untwisting any visable kinks or bends in this hose. A kink or blockage in the waste water hose will affect the ability of your washing machine to drain water from the drum.

Pull out the mains plug. A how to video instruction guide on how to locate remove clean and refit the Drain coin fluff filter on a Bush Washing Machine. Ensure all 4 packing bolts have been removed.

Turn the appliance off. Drain off all water using a drainage hose or by removing the pump cover slowly prepare for a lot of water with a larger container. Be careful though you can easily end up.

You can check which is more likely by listening to the machine during a cycle. Unscrew the cap and clean the filter after youve placed an absorbent cloth on the floor If its damaged replace it as soon as possible to avoid damaging the drain pump. Step 1 Unplug the washing machine.

Common washing machine faults that lead to the washing machine not spinning or not spinning properly. In these cases unplugging the washing machine is the first step toward resetting the computer and fixing the issue1 X Research source 2 X Expert Source Homer Flores Appliance Repair Specialist Expert Interview. The main reason a washing machine wont drain is because of blockage in either the pump or the drain hose.

Help my washing machine wont spin or drain. Usually this should be the first thing you Step 2 Wait for a minute and then plug the washing machine back in. If your washing machine has access to these parts try to remove any blockage.