Bosch Washing Machine Tap Connection

If the tap fitting sticks out of the wallcupboard far enough you dont have an issue.

Bosch washing machine tap connection. Open the water tap carefully checking for the leakages and tighten if necessary. It means the hose is not under mains pressure all the time. Unscrew and remove all four transport brace screws using a WA17 wrench.

Attach your AquaStop Connector which stops the water flow when you disconnect your watering accessory. Please take a few minutes to read and become familiar with the advantages of your washing machine. This is a standard sized adapter compatible with almost all washing machines.

Get hands-on solutions to these and other issues with your appliance right here at a glance. Connect the cold water pipe to the cold water tap and connect the wate water pipe to either a stand pipe or to a connection under the sink. 3 FODFN Open the detergent drawer.

Choosing cold water however inside was very hot. Next we install two flow taps at two exits of the tap and insulate the connection well. It is relatively new almost unused and is one of those that only needs the cold tap connected.

Connect the inlet hose of the washing machine to the adapter. And if you need more help dont hesitate to get in touch with Bosch Home Appliances Service directly for personal advice or for arraning a visit by a Bosch service technician. Adapter can be purchased from any hardware stores.

Ensure there are no kinks in either pipe. Connect the adapter to the tap. Connect the adapter to the tap.