Bosch Washing Machine Heater Not Working

A control board malfunction.

Bosch washing machine heater not working. The heaters continuity can be checked with a meter and if its open circuit or quite high resistance the heater will need replacing. Is your Bosch washing machine not working. Many users face a problem when a dishwasher does not wash dishes properly because water does not heat up.

This is not a fault that you can repair yourself and will require a repair by a trained and qualified Bosch. The new Bosch washing machines with the automatic dosing system i-DOS set the precise amount of detergent for you down to the nearest millilitre - and it only takes the touch of a button. You can absolutely stack this dryer on top of your Bosch Series 8 Washing machine.

Precisely dosed detergent not only protects your laundry but saves energy and water too. A blocked filter will also have the same effect as will an unbalanced load. Faulty connection If there is a faulty connection your machine could turn itself on and off randomly.

Bosch machines all work on the same basic principle if there is no heat then the wash time is extended and an error code or flashing light will be generated at the end of the program. Turn machine off and on again. The element here is located under the drum.

Hi Liza Thanks for the question regarding our Bosch Dryer WTW87565AU. For machine-washable fabrics that are filled with down. Some times it take a few goes to clear fault.

This could be an obstruction or kink in the cold-water hose or the waste hose. As your machine is not extending the wash time or advising of a fault then for these reasons I would suspect the NTC to be at fault as this is the only item that could allow the machine to think it was hot and not. Sometimes the cord can get moved and dislodged from the wall a bit.