Beko Washing Machine Not Heating Water

Beko WM5120W washing machine is failing to heat the water - It continuously washes does not count down - A new element was fittewd a few 6 months ago and a continuity test on this element shows a.

Beko washing machine not heating water. STILL not heating and it is hooked to a hot water inlet. No heating error code. The product must be unplugged during installation maintenance cleaning.

Still trying to get to the bottom of that one. Eventually it stopped the program. Follow the instructions on the textile tags and on the detergent package.

Could be the element or the PCB module electronic control board. Beko codes are shown on the display or in binary code by the leds on the control panel. Plus the washing cycle is always 3-plus hours.

Take back cover off and use multimeter on the heating element like the man says below. Indeed this is a small device often found near the machines heating element. After ascertaining that the heating element is fine the next possibility could be a thermal overload cut-out.

Even the rarest faults happen sometimes though so heres what you can do if your washing machine fails to heat the water. The end of the hose into the waste water or do not insert it into the drain for more than 15. Both will give a no heat fault.

You have to do this in 12 second. Do not place heat sources such as Hobs Irons Ovens etc. 4 hour round trip After removing its heating element with the thermistor and putting it in the original machine and getting it to start washing it is heating the water.