Beko Washing Machine Not Draining Water

Keep reading for a rundown on what can go wrong and how to fix your Beko washing machine.

Beko washing machine not draining water. There are several reasons for your washing machine not to drain. See if the pump filter is dirty or clogged. I tried holding the reset button to end the cycle and it flashes END then goes back to the wash cycle for two seconds then back to end.

The pump filter should be cleaned every three months or when its clogged. The most common causes of a Beko washing machine not draining are a dirty or clogged pump filter a bent or clogged drain hose and issues with wastewater. Remove the 3 screws holding the pumpfilter housing in place and reach in underneath and turn anticlockwise to free it from washing machine you can then see the 2 hoses held on by spring hose clips easily removed and slipped back up the pipes and removed pipes from filter housing the multiplug is on a really short piece of wire and is a pain in the ass to reach because the filter housing and metal.

The filter can now be removed from the inlet in the back of the machine. Beko Washing Machine Pump. Maximum spin speed rpm 1400.

Is this a new house that has not had a washing machine fitted before. This video will show you how to replace Beko washing machine pump we are working on a Beko but this guide is. Although it could be the water pump.

This may be blocked by a filter. Sounds like a bearing. On the washing machine and do not use them on the product.

Supplier name or trademark Beko. Without any doubt at all the number one reason that a washing machine not draining is that something is stuck in the machine that prevents the washing machine from draining. If it is not draining presumably the pump is not spinning and or the drain pipe is blocked with something so water cannot exit the machine.