If by any chance the drum is very stiff or has seized up this is the problem.
Beko washing machine drum not turning. The most common causes of a Beko washing machine not draining are a dirty or clogged pump filter a bent or clogged drain hose and issues with wastewater. Heres how to test that. Either an obstruction has jammed the drum or the drum bearings or motor have seized up.
1 Check the washing machines spin cycle. If your washing machine doesnt start hold the start pause and cancel buttons down for about three to four seconds. Carefully pull the washing machine forward so you can access the drain hose.
You can also get drum spring or shock absorber problems. Water not draining from the washing machine. The spindle turns a quarter rotation under resistance before settling into place then repeats around a full rotation.
Ive had this machine for a good few years and have had three issues with it that were easily fixed. Take off the drive belt to find out which one it is. Beko washing machine Will not start wont start Will not open this is usually due to the machine still having water in or a door interlock fault sometimes this might be a printed circuit board fault see video on this.
This should reset the machine and allow you to continue. The motor spindle is stiff and juddery both with and without the belt attached. Do not plug your washing machine into an extension socket only ever plug your washing machine into a mains wall socket.
Open the door and turn the drum by hand. If not Turn the filter anti-clockwise and pull it out. Also check that the drain hose has not been crushed kinked or twisted or is blocked.