Beko Washing Machine Door Wont Lock

Beko WME7247 washing machine Door cant lock.

Beko washing machine door wont lock. Place a container under the filter to collect the remaining water. Use a flat-headed screwdriver to do this. Be sure to open the filter housing slowly to avoid too much water being released in one go.

My beko washing machine wont do anything at all. Open the top cover of your washing machine after unplugging it. If you turn on the machine and it will not start but its showing a light saying the door is not closed correctly then theres a good chance that the door lock may have failed or one of the wires are broken there is also a small.

Once finished make sure you replace the filter properly. It is also possible that there is a special lever to open the door. Replace door lock is faulty.

The machine will be displaying the error Check the door is shutting correctly. If there is power to the washing machine and the lock does not engage you will need to replace the lock. If the lock no longer works as it should then here is our guide to replacing a faulty washing.

Turn off the washing machine from the mains. Remove items that get caught in the door and shut it until you hear a locking sound. Check the door - you need to confirm that the lock engages correctly.

With the band out of the way now you will need to unhook the door seal from the front panel. For example This is a possibility but much more rare if the common wire at the back of the door lock has a break in it somewhere or faulty connection where it connects to other parts of the machine so the power passing through the lock cannot reach its. Set out towels under the machine if its mid-cycle.