Beko Washing Machine Doesn T Start

I tried holding the reset button to end the cycle and it flashes END then goes back to the wash cycle for two seconds then back to end.

Beko washing machine doesn t start. If the holding of the start pause button isnt resetting the machine then you will find the control board is faulty and will need to be replaced. I have come across this faulty quite a few times. If your washing machine has access to these parts try to remove any blockage.

Check for burnt areas or any components on the board that may look watery or. We bought a new handle 2821580200 on Mr Appliances website and were able to fix it by ourselves. I have had problems with it starting for a few days and i am having to slam the door shut to make it start.

If the main control board does not properly control the motor filling valve drain motor or door lock the washer will not start. Reset the breaker and try to start the washer. Pull the washer out and lean it backwards against a wall and look under the washer.

Make sure the door is firmly closed. It was a bit of work though. The handle cost around A24 including delivery fee and GST at that time.

The machine is not spinning. I manually released the door and it stays unlocked. Make sure the machine is tightly plugged in.

With the machine switched off shut the door and turn the dial to the 90 degree position. If neither is at fault you may have a damaged power cord. For around 3-5 seconds press them all down at the same time.