Balancing Ring In Washing Machine

If the washer has excessive vibration the balance ring may have lost its fluid.

Balancing ring in washing machine. The machine can get unbalanced if one of the motor mounts breaks or comes loose. An inertia sensor is mounted at the top of the tub assy as well. It is used in washing machines.

The balance ring is an enclosed plastic container that is partially filled with a salt water solution. Laundry caught below the tub or between the agitator and the inner tub can cause the washer to operate off balance with every load. The fluid in the balance ring shifts to the opposite side of the load to help offset the weight of the load and keep the rotation of the basket stable.

The problem can be anything. Problems could be faulty balance ring front shocks rear shocks bearings rear drum supportetc machine would have to be disassembled and checked for warndamaged parts. This washer has something called.

2 Hold down the Temp and Delay End buttons for 3 seconds until a CB code appears on-screen. The balance ring sits on top of the outer tub and helps to counter the force of the spin cycle. Check the Levelling of Your Unit.

True Balance involves using a Balance Ring located at the front of the tub assy and is filled with oil steel balls. If the appliance still isnt level you will need to readjust the leg or legs accordingly. 3 Press StartPause to run the Calibration cycle.

7 After deposition the maximum radial dislocation between the upper ring and bottom ring is. WH45X10138 Washing Machine Balance Ring. This is normal and the balance ring is sealed to prevent the water from escaping.