You can press any of the buttons or select any cycle andthe end light just ke.
Aeg washing machine wont start. However the fault could also be in wiring to the door lock or the door catch not activating it properly or a faulty on off switch or even the main control module. Make sure that the mains plug is connected to the mains socket. After this is done all the leds will light up now turn the knob anti clockwise to energy saving.
This refers to the triac that controls the pump function on the main controller. Check if there is water in the machine. You shouldnt be able to start the machine with the door open as a safety feature.
Check for burnt areas or any components on the board that may look watery or. Mains plug is not plugged in. Try reading the manual to see if there is a reset process you can follow as.
If the fault persists please arrange an engineer visit. Make sure that the appliance door is. Sunday June 23 2019 at 835 am.
Leave the washing machine to stand for a few hours to warm up and it should start to work. Make sure the door lock icon is not active. Common AEG Washing Machine Problems And How To Troubleshoot Them The programme wont start - This problem could be related to the power supply.
My AEG Lavamat W 1250 Electronic washing machine has stopped. If you press the start button the door locks but I get no display or lights. The only way to determine whether the control board is at fault is to inspect it visually.