5e Error In Washing Machine

Since this error appears when the washer has finished the washing cycle and about to start the rinse cycle it means the problem is with drain of soapy water.

5e error in washing machine. 4 Grip the cap on the end of the emergency drain tube and then slowly pull it out about 15 cm about 6 inches. If your Samsung washer is flashing one of these codes it signals a drainage problem. 3 Unscrew the emergency drain cap by turning it to the left.

So its tried draining out the water for 10 minutes and the water level still hasnt fallen below a specified level or at least it thinks it hasnt. The Samsung washing machine will display the 5E error code if the water is not draining out in the allotted time. Samsung Washing Machine Pumps.

Check the inlet hose that connects your machine to the tap. If you would like help in manually draining the water from your washer visit our page about Emergency Drain a Samsung Front Loader. Blocked Drain Pump Filter.

Washing machine has failed to drain the water 5E error. If water level frequency is still lower than the reset level frequency 2520kHz in 10 minutes after starting of water drain this error will occur. Please do take care to read the information thoroughly as it is there to help you understand fault codes and to keep you safe.

In this video I show how to easily fix the Samsung 5E washing machine error. Solution 1 Unplug the washing machine from the power supply. Watch before you call a plumber.

Make sure everything is. Error 5E is usually displayed on the display of the Samsung washing machine at a time when the program has already completed the wash and is trying to start rinsing the laundry. Plug the washer back in and switch on the unit by pressing the Power button.